Infors HT MULTITRON STANDARD Operating Manual page 42

Multitron Standard - Operating manual
Accessories
Service Life
Suitable/Unsuitable Vessels
Page 42 of 104
Sticky Stuff is a consumable that typically has to be replaced every 2
to 5 years. The service life depends on how the material is used and
cleaned. If you are regularly using aggressive chemicals to clean or
disinfect, we recommend replacing the Sticky Stuff every 2 years.
NOTICE
Normal ageing and/or use of aggressive chemicals reduces the adhe-
siveness. This can result in vessels coming lose and thus damaging
the device.
− Replace severely worn adhesive matting.
− Only use absolutely clean, dry and grease-free adhesive matting.
− Check the adhesiveness prior to use. If you are unsure, slowly
increase the rotation speed and check that the vessels adhere
safely.
Sticky Stuff is suitable for use in combination with the following ves-
sels:
Erlenmeyer or Fernbach flasks made from glass or polycarbonate
■
with a smooth bottom and without crowning
When using unsuitable vessels, the adhesive power is reduced signifi-
cantly. If unsuitable vessels are used in combination with Sticky Stuff,
it is the user's responsibility to check if the adhesiveness suffices.
In addition, only reduced rotation speeds are possible when using
unsuitable vessels. Unsuitable vessels include, for example:
High and narrow vessels
■
Bottles
■
Erlenmeyer flasks with crowning and correspondingly reduced con-
■
tact area
29.11.2024