Infors HT MULTITRON STANDARD Operating Manual page 31

3.6 Operating and Display Elements
3.6.1 Power Switch
3.6.2 Operating Panel
Kopiervorlagen diverse Kopiervorlagen diverse
1 View boxes for actual values, setpoints, alarm messages and error messages
2 Function buttons for entering parameter values (orange)
3 Parameter symbols (red)
Kopiervorlage Bilderrahmen Kopiervorlage Bilderrahmen
4 Function symbols (green)
29.11.2024
The power switch is located on the right-hand side of the device. In
addition to normal switching on and off, the power switch also works
as an emergency switch.
Kopiervorlagen diverse
All device functions can be controlled directly via the operating panel
on the front of the device.
1
Kopiervorlage Bilderrahmen
FT EX
RPM
°C
4
For more information on the display and operating elements on the
operating panel, see ⮫ Chapter 1.3 'Operating and Display Elements'
on page 11.
Multitron Standard - Operating manual
If the device is switched off, all parameter setpoints
remain stored and the device restarts immediately
when it is switched on again.
RPM
°C
3
Setup and Function
2
F
FT
Page 31 of 104