Infors HT MULTITRON STANDARD Operating Manual page 36

Multitron Standard - Operating manual
Accessories
4.1.2 Tray with Steel Clamps
4.1.3 Tray with Pin Holders
Overview
Page 36 of 104
Fitting identical clamps on the entire tray results in the following
capacities:
Flask size [mL]
25
50
100
250
500
1000
2000
3000
4000
5000
For applications in which large numbers of microtitre or deep-well
plates need to be incubated, various trays with pin holders are avail-
able. These enable loading with several layers of microtitre and deep-
well plates.
The plates can be stacked. This allows you to simultaneously incubate
up to 72 deep-well plates and up to 144 microtitre plates on one M
tray.
The trays are designed for plates with the dimensions 85.1 x 127 mm.
To ensure the cultures receive the optimum oxygen supply, spacers
can be placed between stacked plates. It is available in two variants:
Number of flasks per M tray
197
131
91
48
31
19
13
9
8
6
Ring spacers (10 mm high) are placed
on the pins individually. Depending on
the type of tray loading, this makes it
possible to remove individual plates or
stacks of plates.
29.11.2024