Removing The Front Panel - NEC PowerMate Professional 9000E Series User Manual

Removing the Front Panel

Remove the front panel before installing a device in one of
the 5 1/4-inch accessible device bays. The front panel does
not need to be removed if you are installing a 3 1/2-inch hard
drive. If you are going to install a 5 1/4-inch device, you also
need to remove the blank panel that covers the bay on the
front panel, and the metal bay cover that covers the accessible
device bay.
Remove the front panel as follows:
1. Six metal tabs hold the front panel to the front of the
system unit. Remove the front panel by evenly pulling it
away from the system unit to release the tabs.
A – Front Panel
2. Identify the accessible device bay where the device will
be installed.
Removing the front panel
Installing Options 4-55