NEC PowerMate Professional 9000E Series User Manual page 204

Log onto the BBS as follows.
1. From the Windows desktop, click the
2. Point to
Programs
HyperTerminal .
3. Double click the
Hypertrm.exe
program appears.
4. Follow the instructions on the screen to set up your
modem. Click the
information about dialing the phone number.
If you need to check communications settings, check that
the settings match the following BBS parameters.
T
: select any baud rate that matches your
Baud rate
modem
T
: none
Parity
T
: 8
Data bits
T
: 1
Stop bits
T
Flow control : Xon/Xoff (select Hardware if using
14.4 Kbps or higher).
5. Following the HyperTerminal instructions, enter the BBS
phone number (
978-635-4706
system and/or location might require a
Note:
The first time that you use the BBS,
you are requested to provide information for a
new user questionnaire.
6. Press
Enter twice.
Start
. Point to Accessories
icon. The HyperTerminal
help button for
HyperTerminal
). Your business phone
9 1
Getting Services and Support 6-7
button.
and then click
or prefix.
1