Bios Setup Utility; Using The Bios Setup Utility - NEC PowerMate Professional 9000E Series User Manual

Hide thumbs Also See for PowerMate Professional 9000E Series:
Table of Contents

Advertisement

BIOS Setup Utility

The BIOS Setup Utility is used to change system
configuration parameters. The utility is resident in the system
FLASH memory and does not require a diskette or an
operating system present to run. The following sections
describe how to use the BIOS Setup utility to configure the
system.

Using the BIOS Setup Utility

You access the BIOS Setup utility when you turn on or
reboot your system. To run the BIOS Setup utility, perform
the following procedure:
1. Power-on or reboot the system.
2. Press
. The BIOS Setup utility starts and the Main
F2
Menu is displayed. The menu bar at the top of the Main
Menu lists the selections in the following table:
Menu
Main
Advanced
Security
Boot
Exit
BIOS Setup Utility Menus
Use
Use this menu for basic system configuration.
Use this menu for setting the Advanced Features
available on your system.
Use this menu to set User and Supervisor Passwords
and secure mode features.
Use this menu to configure Boot Device priority.
Exits the current menu.
Configuring the System 3-3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerMate Professional 9000E Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents