The following figure shows the device bay locations.
A – 3 1/2-Inch Internal Bays B – 5 1/4-Inch Accessible Bays
C – 3 1/2-Inch Accessible Bay (contains 1.44-MB Diskette Drive)
Preparing the Device
Before installing a storage device in the system, follow any
preinstallation instructions that come with the device. For
example, check the following information:
T
Diskette drive — remove any termination on the diskette
drive. See the documentation that comes with the drive.
T
IDE drive — check the jumper settings on the device
before installing it. See the documentation that comes with
the device for jumper setting information.
Locating device bays
Installing Options 4-41