Table of Contents
Advertisement
Quick Links
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER
The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Computer Systems Division, Packard Bell NEC, Inc.
(hereinafter "NECCSD") and/or its licensors. NECCSD and/or its licensors, as appropriate,
reserve all patent, copyright and other proprietary rights to this document, including all
design, manufacturing,reproduction, use, and sales rights thereto, except to the extent said
rights are expressly granted to others.
The NECCSD product(s) discussed in this document are warranted in accordance with the
terms of the Warranty Statement accompanying each product. However, actual
performance of each such product is dependent upon factors such as system configuration,
customer data, and operator control. Since implementation by customers of each product
may vary, the suitability of specific product configurations and applications must be
determined by the customer and is not warranted by NECCSD.
To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NECCSD is prohibited.
FaxFlash is a trademark of NEC Computer Systems Division (NECCSD), Packard Bell NEC, Inc.
NEC is a registered trademark of NEC Corporation and PowerMate is a registered trademark of NEC Technologies, Inc.; these registered
trademarks are used under license by NEC Computer Systems Divison (NECCSD), Packard Bell NEC, Inc.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective trademark
owners.
First Printing — July 1997
Copyright 1997
NEC Computer Systems Division
Packard Bell NEC, Inc.
1414 Massachusetts Avenue
Boxborough, MA 01719-2298
All Rights Reserved
Advertisement
Table of Contents
Related Manuals for NEC POWERMATE V AND P
Summary of Contents for NEC POWERMATE V AND P
- Page 1 FaxFlash is a trademark of NEC Computer Systems Division (NECCSD), Packard Bell NEC, Inc. NEC is a registered trademark of NEC Corporation and PowerMate is a registered trademark of NEC Technologies, Inc.; these registered trademarks are used under license by NEC Computer Systems Divison (NECCSD), Packard Bell NEC, Inc.
-
Page 2: Preface
Preface ® This addendum to the PowerMate V & P Series Service and Reference Manual (document number 819-181516-000) provides updated information on the computer’s hardware for users who need an overview of system design. This information applies to computers with the following model numbers: EM-2120-24853E EM-2120-24853CE EM-2130-24853E... -
Page 3: Table Of Contents
Contents Preface.........................v Section 1 Technical Information System Overview ......................1-1 SIMM Upgrade ......................1-2 Performing Memory Upgrades ................1-2 Locating SIMM Sockets..................1-2 Checking System Memory..................1-2 Installing SIMMS....................1-4 Integrated Graphics......................1-5 Video Memory....................1-5 Video Resolutions and Refresh Rates .............1-5 Interrupt Controller......................1-5 Network Interface......................1-6 Hard Disk Specifications....................1-7 System Specifications....................1-9 Section 2 Setup and Installation Section 3 Illustrated Parts Breakdown... - Page 4 Contents List of Tables PowerMate P ETC Series System Configurations...........1-1 Recommended Memory Upgrade Path ............1-3 Video Resolutions and Refresh Rates .............1-5 Interrupt Level Assignments................1-6 Hard Disk Drive Specifications...............1-7 System Specifications..................1-9 PowerMate P ETC Series Field-Replaceable Parts List........3-2 PowerMate P ETC Series Documentation and Packaging.......3-5...
-
Page 5: Section 1 Technical Information
This section describes features and components that are specific to the PowerMate P ETC Series of NEC PowerMate V & P Series computers. For information that is general to all PowerMate V & P Series computers, see the PowerMate V & P Series Service and Reference Manual (part number 819-181516-000) or the PowerMate V &... -
Page 6: Simm Upgrade
Technical Information SIMM UPGRADE PowerMate P ETC Series system configurations come with 16 MB of main system memory. Six sockets on the system board support up to 384 MB of high-speed memory using the following industry-standard, tin-plated, single in-line memory modules (SIMMs): NOTE: You may install 60-ns, parity or nonparity, extended data output (EDO) SIMMs into the SIMM sockets. -
Page 7: Recommended Memory Upgrade Path
Technical Information NOTE: SIMM memory must be installed in pairs of the same memory type. Table 1-2 Recommended Memory Upgrade Path Total Bank 0 Bank 1 Bank 2 Memory SIMM 1 SIMM 2 SIMM 3 SIMM 4 SIMM 5 SIMM 6 16 MB 4 MB 4 MB... -
Page 8: Installing Simms
Technical Information Table 1-2 Recommended Memory Upgrade Path Total Bank 0 Bank 1 Bank 2 Memory SIMM 1 SIMM 2 SIMM 3 SIMM 4 SIMM 5 SIMM 6 112 MB 32 MB 32 MB 16 MB 16 MB 8 MB 8 MB 128 MB 32 MB... -
Page 9: Integrated Graphics
Technical Information INTEGRATED GRAPHICS The system has an ATI GT-B PCI 64-bit 3D multimedia graphics and video controller integrated on the system board. State of the art techniques are used for optimizing performance in computer graphic intensive applications and graphical user interfaces (GUI). Features include: DDC rev 2b compliance video acceleration and 3D rendering... -
Page 10: Network Interface
Technical Information Table 1-4 Interrupt Level Assignments Interrupt Assignment IRQ 0 Counter/Timer IRQ 1 Keyboard IRQ 2(9) Cascade (INT output from slave) IRQ 3 COM2 and COM4 IRQ 4 COM1 and COM3 IRQ 5 Parallel Port 2/Audio (if present) IRQ 6 Diskette Drive Controller IRQ 7 Parallel Port 1... -
Page 11: Hard Disk Specifications
Technical Information Figure 1-1 Network Interface Board HARD DISK SPECIFICATIONS The PowerMate P ETC Series computer contains a 2.1-GB Western Digital IDE hard disk. The following table provides hard disk specifications. Table 1-5 Hard Disk Drive Specifications 2.1-GB Hard Disk Features (WD Caviar AC22100) Physical Configuration... - Page 12 Technical Information Table 1-5 Hard Disk Drive Specifications 2.1-GB Hard Disk Features (WD Caviar AC22100) Dimensions Height 1.00 in. (25.4 mm) Length 5.75 in. (146.0 mm) Width 4.00 in. (101.6 mm) Weight 1.1 lb (.50 kg) Performance Track-to-track seek Average seek Maximum seek 22 ms Average Latency...
-
Page 13: System Specifications
Technical Information SYSTEM SPECIFICATIONS System specifications are included in Table 1-6. Table 1-6 System Specifications Item Specification Dimensions and Weight System Unit Width: 8.5 inches (21.59 cm) Depth: 18.5 inches (46.99 cm) Height: 14.5 inches (36.83 cm) Weight: 20.5 lb (9.23 kg), dependent upon options Keyboard Width: 19.0 inches (48.3 cm) Depth: 8.4 inches (21.3 cm) - Page 14 1-10 Technical Information Table 1-6 System Specifications Item Specification Microprocessor Intel Pentium (processor type dependent on system) PowerMate P2166 166-MHz Pentium PowerMate P2200 200-MHz Pentium Cache Memory 16 KB of primary cache (8 KB data, 8 KB instruction) integrated in the processor, 256 KB secondary cache built-in on system board Flash ROM 128-KB (28F001) Flash ROM...
- Page 15 Technical Information 1-11 Table 1-6 System Specifications Item Specification 20-Watt Speakers Standard in multimedia models Magnetically shielded 20-watt stereo speakers Power on/off switch, power lamp, volume control Treble and bass tone control Built-in stereo amplifier 20W RMS power output 2-way speaker system 2-inch tweeter 4-inch woofer Subwoofer output jack...
-
Page 16: Section 2 Setup And Installation
Section 2 Setup and Installation ® This section contains information on setting up PowerMate P ETC Series systems. The following figure shows the location of the interface ports on the rear of the system unit for configuring PowerMate P ETC Series hardware. Use the procedures described in Section 2 of the PowerMate V &... -
Page 17: Network Interface Board Connectors
Setup and Installation Figure 2-2 Network Interface Board Connectors The network board has connectors for coaxial and twisted-pair network cabling: The BNC connector supports thin coaxial cables. The AUI connector supports thick coaxial cables. The RJ-45 connector supports twisted-pair 10BASE-T cables. Connect the network cable to one of these connectors (depending on the type of network). -
Page 18: Section 3 Illustrated Parts Breakdown
Section 3 Illustrated Parts Breakdown This section contains updated parts lists and an exploded-view diagram for the PowerMate P ETC Series minitower system. The information in this section applies to the following models: EM-2120-24853E EM-2120-24853CE EM-2130-24853E EM-2139-24853CE. Table 3-1 lists the field-replaceable parts for the computer*. Figure 3-1 provides the illustrated parts breakdown. -
Page 19: Powermate P Etc Series Field-Replaceable Parts List
Illustrated Parts Breakdown Table 3-1 PowerMate P ETC Series Field-Replaceable Parts List* Item Description Part Number Serial interface cable 158-050454-002 LED power cable 158-052170-001 Hard disk power cable 158-052169-000 Sleep switch cable assembly 158-050895-004 Reset switch cable assembly 158-050685-031 Mouse, PS/2-style 158-052115-000 Keyboard, Chicony 158-052121-000... - Page 20 Illustrated Parts Breakdown Table 3-1 PowerMate P ETC Series Field-Replaceable Parts List* Item Description Part Number 1-MB SGRAM video memory module 158-052137-100A (non-multimedia models only) System board, without audio 158-056561-000 System board, with audio 158-056562-000 3 1/2-inch, 2.1-GB IDE hard disk, 215-00031 WD Caviar AC22100 Network interface card (NIC)
- Page 21 Illustrated Parts Breakdown Figure 3-1 PowerMate P ETC Series Illustrated Parts Breakdown* * This data was prepared July 1997. For an up-to-date listing of spare parts, please call FaxFlash™ at 1-888-329-0088 (or 1-508-635-6090 outside the U.S.) and order document number 42181820.
-
Page 22: Powermate P Etc Series Documentation And Packaging
Illustrated Parts Breakdown Table 3-2 lists PowerMate P ETC Series documentation and packaging part numbers. Table 3-2 PowerMate P ETC Series Documentation and Packaging* Description Part Number PowerMate P ETC Series User’s Guide 819-181784-000 PowerMate V & P Series Service and Reference Manual 819-181519-000 PowerMate V &... - Page 23 Index Technical help, 3-1 Configurations, 1-1 Document part number, 3-5 Hard disk specifications, 1-7 Help, 3-1 Illustrated parts breakdown, 3-1 Integrated graphics, 1-5 video memory, 1-5 resolutions and refresh rates, 1-5 Interrupts, 1-5 Memory, 1-2 Network interface board, 1-6 Option installation SIMM upgrade, 1-2 checking system memory, 1-2 Packaging...
- Page 24 (For United States Use Only) FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 25 A lithium battery in your computer maintains system configuration information. In the event that the battery fails to maintain system configuration information, NEC recommends that you replace the battery. See Chapter 4 in the PowerMate V & P Series Service and Reference Manual for battery replacement information.