Voltage Selection - NEC PowerMate Professional 9000E Series User Manual

The push-button on/off power switch on the front
panel of the workstation does not turn off the AC
power. To remove AC power from the
workstation, you must unplug the AC power
cable from the power supply or the wall outlet.

Voltage Selection

A 260-watt (rated) power supply is integrated into the
workstation. The voltage ratings for the power supply are
provided in the following table.
Voltage
100-127
200-240
Before connecting the power cable to the back panel of the
workstation, make sure that the voltage selector switch is set
to the correct AC line source voltage for your region.
T
For line voltages between 100 and 127 VAC, set the line
voltage selector switch to 115V (115 VAC).
T
For line voltages between 200 and 240 VAC, set the line
voltage selector switch to 230V (230 VAC).
Make sure that the correct voltage (115V or 230V) is visible
on the switch (see the following figure). If necessary, use a
flat-head screwdriver to set the switch.
2-4 Setting Up the System
! CAUTION
Power Supply Voltage Rating
Input Frequency (Hz)
60
50
Current (Amps)
2
1.25