Installing A 5 1/4-Inch Device In An Upper Bay - NEC PowerMate Professional 9000E Series User Manual

Installing a 5 1/4-Inch Device in an Upper Bay

Use the following procedure to install a 5 1/4-inch device into
either of the upper two 5 1/4-inch accessible device bays. If
you are installing a device in the lowest 5 1/4-inch bay, see
"Installing a 5 1/4-Inch Device in the Lowest Bay."
Note:
installed in a 5 1/4-inch device bay if the device
is fitted into a 5 1/4-inch frame adapter frame
first.
1. Follow the preinstallation instructions that come with
your device, such as setting jumpers and switches.
See "Preparing the Device" for device preparation
information.
2. Remove both side covers of the system unit (see
"Removing the Side Covers").
3. Remove the front panel (see "Removing the Front
Panel").
4. From the front of the system, insert the device, connector
end first, into the device bay.
Note:
for cabling, do not insert a 5 1/4-inch device all
the way into the bay.
5. Connect the device cables (see "Connecting Device
Cables" and "Cabling Storage Devices").
A 3 1/2-inch hard drive can also be
To easily access device connectors
Installing Options 4-59