Installing Drivers - NEC PowerMate Professional 9000E Series User Manual

7. Double click one or more of the entries in the list of
applications and online documents. A checkmark should
appear to the left of each entry that is double clicked. To
deselect an entry, double click it again so that the
checkmark disappears.
Items that appear grayed-out are already installed on your
system.
8. Click
OK . The selected files load sequentially, and a
progress bar appears for each item you selected.
9. When all the files have finished installing, remove
the CD.
10. Click
Restart Computer
installation process completes successfully.
This completes the Selective Application Restore procedure.
After the Selective Application Restore process completes,
you can reinstall any personal applications. These
applications are not on the NEC Select Install CD and must
be reinstalled after the Selective restore process completes.

Installing Drivers

Your system comes with an NEC Select Install CD. The CD
contains the device drivers that were delivered on your
system, and a full suite of optional drivers that correspond to
hardware options offered by NEC CSD. If you install
optional hardware in the system, or make other system
enhancements, use the NEC Select Install CD to install the
drivers required for system operation.
Note:
system, the drivers that were factory-shipped are
automatically installed.
3-36 Configuring the System
to reboot and ensure that the
When you restore the operating