Removing The Front Panel - NEC POWERMATE VE ETC Manual

Connect the drive cables.
7.
Replace the 3 1/2-inch drive bracket (see "Replacing the
8.
3 1/2-Inch Drive Bracket").

Removing the Front Panel

Remove the front panel only if you are installing a 5 1/4-
inch device. The front panel does not need to be removed if
you are installing a 3 1/2-inch hard disk drive.
If you are installing a 3 1/2-inch hard disk drive, see
"Installing the 3 1/2-Inch Drive."
1. Remove the system unit cover as previously described.
Remove the front panel by releasing the four tabs from
2.
the back of the front panel.
Tabs
(behind front panel)
Identify the slot for the device being installed.
3.
Front Panel
Tabs
(behind front panel)
Blank Panel
Removing the front panel
Installing Options 3-37