Removing The Front Panel; Removing The Cd-Rom/Dvd Drive; Releasing The Front Panel - NEC Direction SP E-Series Reference Manual

T
installing a 5 1/4-inch device
T
replacing the front panel.

Removing the Front Panel

Use the following procedure to remove the front panel.
1. Locate the two plastic tabs at the front of the chassis. They are indicated by
two arrows engraved on the chassis.
2. Press down on the two tabs and press in a third tab at the end of the panel to
release the panel (see the following figure).
3. Pull the panel away from the chassis.

Removing the CD-ROM/DVD Drive

If you need to remove the CD-ROM/DVD drive, you need to remove the
accessible device cage.
Use the following procedure to remove the accessible device cage.
1. Locate the screw on the front of the system between the 3.5-inch blank panel
and diskette drive. Remove the screw.

Releasing the Front Panel

Option Installation 3-17