NEC PowerMate Professional 9000E Series User Manual page 156

2. Replace the blank plastic panel if necessary. Press the
tabs on the back side of the panel together slightly, and
insert them into the slots on the metal bay cover over the
accessible device bay (see the figure "Locating blank
panel tabs" in the previous section).
3. Align the six tabs on the front panel with the holes in the
front of the system unit.
4. Evenly press the front panel into position until the tabs
lock the panel in place.
A – Locking Tabs B – Front Panel
5. Replace the system unit cover (see "Replacing the Side
Covers").
4-58 Installing Options
Aligning the front panel