Installing Drivers With The Nec Select Install Cd - NEC PowerMate Professional 9000E Series User Manual

When you restore the operating system using the NEC OS
Restore program, the drivers that were factory-shipped are
automatically installed.
Please read this section in its entirety before using the NEC
Select Install CD to install drivers on your system.

Installing Drivers with the NEC Select Install CD

Follow these steps to install drivers.
Do not select and install drivers for any hardware
that is not currently installed on the system.
Doing so can damage the operating system.
1. Install the device that will require the new driver before
installing the driver.
2. With the operating system running, insert the NEC Select
Install CD into the CD-ROM drive.
3. Access the subdirectory that corresponds to the driver you
wish to install.
4. Double click the
driver you wish to install.
5. Follow the prompts in the installation wizard to install the
driver.
6. Repeat steps 1 through 5 for each driver you wish to
install.
7. Restart the computer to ensure that the installation
process completes successfully.
! CAUTION
icon corresponding to the
setup.exe
Configuring the System 3-37