Removing The Front Panel; Removing The Cd-Rom/Dvd Drive - NEC Direction SP User Manual

Hide thumbs Also See for Direction SP:
Table of Contents

Advertisement

Removing the Front Panel

1.
Locate the two plastic tabs at the front of the chassis.
They are indicated by two arrows engraved on the
chassis.
Press down on the two tabs and press in a third tab at
2.
the end of the panel to release the panel.
3.
Pull the panel away from the chassis.

Removing the CD-ROM/DVD Drive

If you need to remove the CD-ROM/DVD drive, you need
to remove the accessible device cage.
Use the following procedure to remove the accessible device
cage.
1.
Locate the screw on the front of the system between the
3.5-inch blank panel and diskette drive (see the following
figure). Remove the screw.
Releasing the front panel
Installing Options 5-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Direction sp e-series

Table of Contents