NEC PowerMate Professional 9000E Series User Manual page 71

Description Recommended Setting or
Display Only
SCAM Off
Support
Parity On
Host SCSI ID 7
Scan Order Low to High
Removable None
media
support
CHS Mapping SCSI Plug and Play
Mapping
To change device configuration parameters, perform the
following steps:
1. At the SCSI Configuration Utility Main Menu, select the
adapter that connects to the SCSI device you are
reconfiguring. The first adapter listed controls the
operation of the hard drives; the second controls SCSI
removable media devices. Press
2. Select "Device Selections" and press
0 to 7 screen displays (see the following table).
3. Select the SCSI device you are reconfiguring and press
. For SCSI hard drives, see the table "SYM53C875
Enter
Adapter 1" on the following page; for SCSI removable
media devices, see the table "SYM53C875 Adapter 2" for
recommended settings.
3-20 Configuring the System
Adapter Setup Screen
SYM53C875
Enter
Your Configuration
SYM53C875
1 2
.
. The Devices
Enter