Bootable Cd-Rom Is Not Detected; Problems With The Network - NEC PowerMate Professional 9000E Series User Manual

T
If other software runs correctly on the system, contact
your vendor about the failing software.
If the problem persists, contact the software vendor's
customer service representative for assistance.

Bootable CD-ROM Is Not Detected

Is the BIOS set to allow the CD-ROM to be the first bootable
device? Check your BIOS Setup (F2) configuration.

Problems with the Network

The server hangs when the drivers are loaded:
T
Change the PCI BIOS interrupt settings. Try the "PCI
Installation Tips" in the following section.
Diagnostics pass, but the connection fails:
T
Make sure the network cable is securely attached.
T
Make sure you specify the correct frame type in your
NET.CFG file.
The Link LED doesn't light:
T
Make sure you have loaded the network drivers.
T
Check all cable connections.
T
Try another port on the hub.
T
Make sure you have the correct type of cable between the
adapter and the hub. Some hubs require a crossover cable
while others require a straight-through cable (for more
information on crossover cabling, see your hub
documentation).
Solving System Problems 5-17