Replacing The Drive Cage - NEC PowerMate Professional 9000E Series User Manual

A – Drive Cage
4. Lift the drive cage up slightly to free the large hooked
tabs from the slots in the chassis.
5. Pull the drive cage away from the chassis.

Replacing the Drive Cage

Replace the drive cage in the chassis by following these
steps:
1. Hook the large tabs on the left rear edge of the drive cage
into the slots on the left rear edge of the chassis.
2. Swing the drive cage into the chassis.
3. Line up the holes on the rear of the drive cage with the
holes in the chassis.
Removing the drive cage
Installing Options 4-67