Diskette Drive Signal Cable - NEC PowerMate Professional 9000E Series User Manual

System board auxiliary cable connectors
A – Serial Port B (COM2) Connector B – USB Connector
C – Chassis Intrusion Alarm Connector
D – System Fan Connector E – Not Used

Diskette Drive Signal Cable

A three-connector diskette drive signal cable comes attached
to the system board and to the standard 1.44-MB diskette
drive.
A second diskette drive can be connected to the middle
connector on the diskette drive cable.
The colored edge of the cable goes to pin 1 on the cable
connector. Align the red edge of the cable with pin 1 (the
notched end) on the drive connector.
Installing Options 4-45