Speaker Assembly Removal; Speaker Tabs - NEC PowerMate Pro150 Series Service Manual

Speaker Assembly Removal

Remove the speaker per Figure 5-15 and the following steps.
1. Remove the side panel, expansion boards, and card guide/fan bracket as
previously described.
Unplug the speaker from its connector on the system board. (See Appendix A,
2.
Connector Pin Assignments, for the system board connector locations.)
Slide the speaker out from the four speaker tabs.
3.
Front of System
Uniit Chassis
To Connector
on System Board
Remove the speaker from the system unit.
4.
Figure 5-15 Speaker Tabs
Repair 5-13
1 of 4
Tabs