NEC PowerMate Pro150 Series Service Manual page 67

2-30 Setup and Operation
The Security Submenu lets you check or change the following password parameters.
n
User Password
This field allows you to enable a user level password during POST and to enter
Setup. When both the "User Password is" and "Administrative Password is" are
"Enabled," only the Administrative Password gives you full access to all Setup
fields. This field can be either "Enabled" or "Disabled," the default is "Disabled."
n
Administrative Password
This field allows you to enable a administrative level password during POST and
to enter Setup. When both the "User Password is" and "Administrative Password
is" are "Enabled," only the Administrative Password gives you full access to all
Setup fields. This field can be either "Enabled" or "Disabled," the default is
"Disabled."
Set User Password and Set Administrative Password
Enable either or both the User or Administrative Passwords and a dialog box with
the following prompts appears. Passwords are not case sensitive.
To set a password, type the password and press
and press Enter
If there is already a User or Administrative Password and a dialog box with the
following prompts appears.
Unattended Start
The Unattended Start field controls the point at which the User Password is
required. The Unattended Start field can only be set if a User Password is in
effect.
Disabled (default)
The text string prompt "Enter Password (1)." is displayed.
NOTE: If neither the User or Administrative
Password is Enabled,
"
Security Hot Key fields are not displayed.
.
Enter new password: [
Confirm new password:
Enter current password: [
Enter new password: [
Confirm new password:
prompts the user for the password before the system boots.
the Unattended Start and
"
Enter . Reenter your password
]
[ ]
]
]
[ ]