Speaker Assembly Removal; Speaker Screw - NEC POWERMATE 4100M Service Manual

5-10 Desktop Repair

Speaker Assembly Removal

Remove the speaker from the device cage as follows.
1. Remove the top cover as previously described.
Unplug the speaker connector P6 on the system board.
2.
Remove the speaker screw from the side of the device cage (see Figure Section 5-
3.
12).
Lift the speaker from the slot in the device cage.
4.

Speaker Screw

Figure Section 5-12 Speaker Screw
Device Cage
To Connector
P6 on System
Board