Cd-Rom Reader Settings; Cd-Rom Reader Controls And Indicators; Cd-Rom Jumper Settings - NEC PowerMate Pro150 Series Service Manual

1-18 Technical Information
n
emergency eject hole in the front panel for manually opening the CD tray if power
is lost. Insert a jewelers screwdriver into the hole. Turn the screw
counterclockwise to open the tray and clockwise to close the tray.
Figure 1-3 CD-ROM Reader Controls and Indicators
To load a disc in the six-speed CD-ROM reader, follow these steps.
1. Press the stop/eject button. The CD tray opens.
Put the CD, printed side up, into the tray.
2.
Press the stop/eject button. The tray closes.
3.
To remove the disc, press the stop/eject button. The tray opens, allowing removal
4.
of the disc.

CD-ROM Reader Settings

The reader is set as the master device on the secondary IDE/PCI port (see Figure 1-4).
Connector locations are given in Appendix A.
Cable
Select
Audio Connector
CD Tray
Headphone Volume
Jack Control
Slave Master
(default)
IDE Connector
Figure 1-4 CD-ROM Jumper Settings
Emergency
Eject Hole
Eject/Retract CD Busy
Button Lamp
Power Connector