Blank Panel Removal; Speaker Assembly Removal - NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual

5-8 System Unit Repair

Blank Panel Removal

Remove the blank panels from the front panel as follows.
1. Remove the system unit cover and front panel as previously described.
2. Remove the blank panel from the selected slot by pressing the panel tabs from in-
side the front panel and pushing the blank panel out (see Figure Section 5-16).

Speaker Assembly Removal

Remove the speaker from the device cage as follows.
1. Remove the system unit cover as previously described.
Unplug the speaker from its connector on the system board (see Appendix A for
2.
connector assignments).
Top Blank
Panel Tabs
Bottom Blank
Panel Tabs
Figure Section 5-16 Blank Panel Tabs