Removing The Front Panel; Securing The 3 1/2-Inch Drive Bracket - NEC PowerMate Pro150 Series Service Manual

3. Replace the bracket screw you removed earlier to secure the bracket in place.
Figure 3-20 Securing the 3 1/2-Inch Drive Bracket
Continue at step
4.

Removing the Front Panel

Remove the front panel only if you are installing a 5 1/4-inch device. The front panel does
not need to be removed if you are installing a 3 1/2-inch hard disk drive.
If you are installing a 3 1/2-inch hard disk drive, see "Installing the 3 1/2-Inch Drive."
Remove the system unit side panel (see "Removing the Side Panel").
1.
2. Remove the front panel screw securing the panel to the system unit.
Device
Cage
Drive
Bracket
of the "Installing the 3 1/2-Inch Drive" procedure.
9
Option Installation 3-25