How To Use Setup; Navigation Keys - NEC PowerMate Pro150 Series Service Manual

2. Press F1 after POST, but before the system boots up, to start the Setup utility.
3. Setup's Main Menu appears and looks similar to the following screen.
Main
Floppy Options
Primary IDE Master:
Primary IDE Slave:
Secondary IDE Master:
Secondary IDE Slave:
Extended Memory

How to Use Setup

Use the keys shown on the right of the Setup menu to make your selections or exit the
current menu. The following table describes the navigation keys and their alternates.
Key
F1
Esc
Enter
or arrow keys
or arrow keys
F5
F6
F10
Advanced Security Exit
System Date December 27 1995
System Time 08:18:20
Press Enter
Western Digital
Not Installed
Not Installed
Not Installed
Language English (US)
Boot Option Press Enter
Video Mode EGA/VGA
Mouse Installed
Base Memory 640 KB
15360 KB
Main Menu
Table 2-1 Navigation Keys
Function
Provides help for the parameter field being displayed.
Exits the menu.
Executes Command or Selects submenu.
Moves cursor up and down.
Selects next menu.
Loads the Default Configuration values for this menu.
Selects the Previous Value for the field.
Loads the Previous Configuration values for this menu.
Setup and Operation
F1 Help
ESC Back
Enter Select
Previous Item
Next Item
Select Menu
F5 Setup Defaults
F6 Previous Values
F10 Save & Exit
2-15