Table of Contents
Advertisement
3-30
Option Installation
4.
Replace the front panel screw removed earlier to secure the front panel.
5.
Continue at step
ADDING EXTERNAL OPTIONS
The following subsections provide information about attaching peripherals to the external
connectors on the system unit.
n
Parallel Printer
n
Serial Devices
n
SCSI Devices
Parallel Printer
1.
Make sure the power to the system unit and printer are off.
2.
Connect the printer cable to the printer port on the rear of the system unit.
Secure the cable with the screws provided.
3.
Connect the other end to the printer.
4.
of the "Installing the 5 1/4-Inch Device" procedure.
8
NOTE: Before connecting a printer to the
system, be sure that you have set up the printer
correctly. Follow the setup instructions that
come with the printer.
Printer
Port
Figure 3-26 Connecting a Printer Cable
Advertisement
Table of Contents
Troubleshooting
