NEC PowerMate Pro150 Series Service Manual page 46

n
To install Windows NT from CD-ROM, Press Enter
n
To install Windows NT from 3.5" disks (drive A:),
press A .
NOTE: Do not remove the "Setup Disk 3" from
drive A yet.
When the message appears warning you that any existing partitions will be
8.
erased, press to continue.
C
A screen appears listing the available partitions. To install Windows NT on the
9.
highlighted partition or unpartitioned space, press
10. Choose whether to install Windows NT on the FAT or NTFS file system (see
your installation guide for more information). The default is the "FAT" file
system, press
Enter
11. The default path for installing Windows NT is " \ WINNT35." Press
accept the default.
12. Place the Windows NT CD into the CD-ROM reader, and press
When prompted, remove any diskette in drive A and press Enter to restart your
13.
computer and continue the setup.
The system reboots then continues to install Windows NT from the CD.
When prompted, enter your name and tab to the next field to enter the company
14.
name and click on "Continue" or press
15. Verify the information you typed and click on "Continue" or press
16. When prompted, enter your computer name and click on "Continue" or press
Enter .
17. Verify the information you typed and click on "Continue" or press
Choose the desired language and click on "Continue" or press
18.
When prompted, enter your printer name, select the printer model, print to port,
19.
and click on "Continue" or press
20. At the network prompt:
n
if your system comes preconfigured with the 3Com
will not automatically be detected by Windows NT. During the installation
choose to manually select a network adapter.
Click on "Continue" or press
to continue.
Enter
.
Enter
Enter
Setup and Operation
.
Enter
.
Enter
®
3C595 network card, it
to select your network card.
2-9
.
Enter to
Enter .
Enter .
Enter .
.