Update Firmware; Update Single Device - NovaStar Vunit 3000 User Manual

Check the box in front of No. to select all the connected devices.
Step 3 Click Batch Configure to expand the Batch Configure pane where you can batch change
the target device names.
Figure 4-2 Batch change device names
Step 4 Enter a new name in the text box.
Step 5 Click Apply to complete and apply the change.
After the device name is set successfully, other device names are followed by a serial
number starting from 1.
For example, if you enter Vunit 3000 in the text box, the name of the first device in the
device list is Vunit 3000-1 and the name of the second one is Vunit 3000-2.

Update Firmware

You can update the whole device or the desired card in BCTools.
After the whole device or main control card is updated, the device will restart automatically.

4.2.1 Update Single Device

Prerequisites
You have obtained the update package.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
17