Other Operations - NovaStar Vunit 3000 User Manual

Step 6 Aim the remote control matched with the selected product model at the Vunit 3000 and
press the buttons matched with the commands. The system will automatically learn the IR
commands one by one and display them in the text boxes below Command.
Figure 5-29 Command learning
Step 7 Click Complete to complete the learning.

5.7.3 Other Operations

Change the IR command name.

Only IR command name can be changed via the following two ways.
After the command learning is completed, enter a new name in the text box below
−
Command Name in the IR learning window.
On the IR page, select the desired IR command and click
−
Action to open the command editing window where you can change the command
name.
Delete the IR command.

On the IR page, select the desired IR command and click
delete the selected IR command.
You cannot delete the IR command used in the event.
Learn the IR command again.

On the IR page, click Learn Again in the column of Action open the IR learning window.
Press the buttons on the remote control to learn the IR commands again.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
in the column of
in the column of Action to
50