Batch Change Ip Information - NovaStar Vunit 3000 User Manual

Operating Procedure
Step 1 In the device list, click
pane.
Figure 3-4 Network configuration
Step 2 Set the device IP address, subnet mask and gateway.
The IP address you set must not conflict with IP addresses of other devices on the current
network segment.
Step 3 Click Apply to complete and apply the change.

Batch Change IP Information

You can batch change the IP information of the connected Vunit 3000 units in BCTools.
Prerequisites
The device is connected in BCTools.
Operating Procedure
Step 1 Check the boxes in front of the desired devices.
Check the box in front of No. to select all the connected devices.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
in the column of Action to expand the Network Configuration
14