Smartlct; Firmware Update; Novalct - NovaStar MCTRL660 PRO User Manual

Independent controller

Hide thumbs Also See for MCTRL660 PRO:

Table of Contents

MCTRL660 PRO Independent Controller

User Manual

9.3.2 SmartLCT

Connect the MCTRL660 PRO to the control computer installed with SmartLCT V3.2.0

or later via USB cable to perform building-block cabinet configuration, seam

brightness adjustment, real-time monitoring, hot backup, etc. For details on their

operations, see SmartLCT User Manual.

Figure 9-2 User interface of SmartLCT

In NovaLCT, perform the following steps to update the MCTRL660 PRO firmware.

Step 1 Start NovaLCT and choose User > Advanced Synchronous System User Login

and log in as an advanced user.

Step 2 Type the secret code "admin" to enter the program loading page.

Step 3 Click Browse to select the update program path and then click Update.

9.4.2 SmartLCT

In SmartLCT, perform the following steps to update the MCTRL660 PRO firmware.

Step 1 Start SmartLCT and enter the V-Sender page.

Step 2 In the properties area on the right, click

Step 3 Click

Step 4 Click Update.

www.novastar.tech

to select the update program path.

9 Operations on PC

to enter the Firmware Upgrade page.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the MCTRL660 PRO and is the answer not in the manual?