Factory Reset; Firmware Update; About Us; Communication Settings - NovaStar NovaPro UHD User Manual

function to automatically test the device and send the test result to device maintenance
personnel to locate the problems or check the device.
Export Logs: Export the device operation logs.


5.9.6 Factory Reset

Reset all the device settings to defaults.
Menu
Reset (Save IP)
Reset (All)

5.9.7 Firmware Update

Update the device firmware by using a USB drive.
Precondition:
The update program should be stored in the root directory of the USB drive.
The system can automatically detect the update program in the USB drive and ask you

whether to update the firmware.
You can also go to Firmware Update > USB to update the firmware anytime you want.


5.9.8 About Us

View the device hardware version, company website (www.novastar.tech) and email address
(support@novastar.tech).

5.10 Communication Settings

5.10.1 Communication Mode

Figure 5-34 Communication mode
The device is connected to the PC through USB port and Ethernet port. The options are USB Preferred and
LAN Preferred.
When USB Preferred is selected, the device prefers the communication through USB port.

When LAN Preferred is selected, the device prefers the communication through Ethernet

port.

5.10.2 Network Settings

The options are Manual and Auto.
Manual: Set the device IP address, subnet mask and gateway manually.

Auto: The device reads the network parameters automatically.

Reset: Reset all the settings to defaults.

www.novastar.tech
Description
Reset all the settings to defaults, but save the IP address.
Reset all the settings to defaults.
NovaPro UHD All-in-One Controller User Manual
23