Configure Devices; Change Device Names - NovaStar Vunit 3000 User Manual

4

Configure Devices

Change Device Names

After the devices are connected successfully, their default names are the same. You can
change the device name to distinguish different devices.
Change Single Device Name
Step 1 Click the Device Configuration tab to enter the device configuration page.
Step 2 Click
can change the target device name.
Figure 4-1 Change device name
Step 3 Enter a new name in the text box.
Step 4 Click Apply to complete and apply the change.
Batch Change Device Names
Step 1 Click the Device Configuration tab to enter the device configuration page.
Step 2 Check the boxes in front of the desired devices.
www.novastar.tech
in the column of Action to expand the Configure Properties pane where you
Vunit 3000 Professional Control Processor User Manual
16