Run Diagnostics - NovaStar Vunit 3000 User Manual

You can synchronize the device clock via two methods, including Server and Manual.
Server: When you synchronize the device clock via a server, make sure the

communication between the device and server used for time synchronization is normal.
a. Select the time zone where the device is located from the drop-down list next to
Time Zone.
b. Enter the IP address of the server used for time synchronization in the text box next
to Server Address.
Manual

c. Select the time zone where the device is located from the drop-down list next to
Time Zone.
d. Click the date/time picker on the right side of the text box next to Date and Time.
Step 3 Click Apply to complete and apply the configurations.

Run Diagnostics

Diagnose the device and send the test result to our technical support staff for confirming
and fixing the problems as soon as possible.
Step 1 On the Device Configuration page, select the desired device from the device list.
Step 2 Click in the column of Action and then select Diagnose.
Step 3 Click OK in the popup window and the system will automatically run diagnostics.
Step 4 After the diagnostics is complete, the test result will be displayed.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
20