Send To Device - NovaStar Vunit 3000 User Manual

Professional control processor

Step 1 On the Central Control Configuration page, click Project at the top right to open the

corresponding window.

Step 2 Click Export File to open the project file exporting window.

Figure 5-31 Export project files

Step 3 Click Export and select the save location.

Step 4 Click OK to complete the exporting.

5.8.3 Send to Device

After the device configuration is complete, you can save the configuration information as a

project file and also send the configuration information to other Vunit 3000 devices via this

function.

Step 1 On the Central Control Configuration page, click Project at the top right to open the

corresponding window.

Step 2 Click Send to Device to open the corresponding window.

Figure 5-32 Send to device

www.novastar.tech

Vunit 3000 Professional Control Processor User Manual

Table of Contents

Do you have a question about the Vunit 3000 and is the answer not in the manual?