Configure Scheduled Triggers - NovaStar Vunit 3000 User Manual

5.6.2 Configure Scheduled Triggers

Prerequisites
You have added the event or matrix preset.
Operating Procedure
Step 1 Click the Schedule Trigger tab to enter the schedule trigger configuration page.
Step 2 Click Add at the top right to open the scheduled trigger adding window.
Figure 5-25 Scheduled triggers
Step 3 Select the desired repeat mode. The supported options include Everyday, Every Week and
Once.
Everyday: Execute the added event or preset everyday. You need to set the start and

end dates.
Every Week: Execute the added event or preset every week. You need to set the start

and end dates.
Once: You need to set the execution date and time to execute the added event or

preset.
Step 4 Set the trigger event.
When Everyday is selected, you need to set the execution start time.

When Every Week is selected, you need to set the execution day of the week and start

time.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
46