Other Operations - NovaStar Vunit 3000 User Manual

When Once is selected, you need to set the date and start time.

Step 5 Configure the command processing information.
Select the command processing type. The supported options include Event, Preset and
1.
Timeline.
Select the desired event or preset from the event list or preset list.
2.
Click Add to add the selected event or preset to the command list.
3.
In the command list, select an event or preset and click Up or Down on the right to
4.
adjust the sequence of the selected event or preset.
Click Delete to delete the selected event or preset.
−
Click Clear to clear all the selected events or presets.
−
Step 6 Enter the detailed descriptions for the added trigger.
Step 7 Click OK to complete the adding.

5.6.3 Other Operations

Change the trigger.

In the trigger list, select the desired trigger and click
open the trigger editing window where you can edit the trigger. Click OK to complete
the editing.
Delete the trigger.

Delete single trigger: In the trigger list, select the desired trigger and click
−
the column of Action to delete the selected trigger.
Batch delete: In the trigger list, check the boxes in front of the desired triggers and
−
click Batch Delete at the top right to delete all the selected triggers.
Copy the trigger.

In the trigger list, select the desired trigger and click
system will copy the trigger and open the trigger editing window where you can edit the
trigger. Click OK to complete the copy.
Filter the trigger.

Filter the conditional trigger: Select the desired event type from the drop-down list
−
next to Type to filter the trigger.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
in the column of Action to
in the column of Action. The
in
47