Project Files; Import Project Files; Export Project Files - NovaStar Vunit 3000 User Manual

Test the IR command.

After the IR learning is completed and the controlled device is connected, click Execute
in the column of Action to test whether the current command is correct.
Export the IR command.

After the IR command is added, click Export at the top right to export the command
information to your local device.

Project Files

5.8.1 Import Project Files

After the device is connected, you can manually add the event, trigger and perform IR
learning. You can also quickly add the configuration information by importing the project
file.
Step 1 On the Central Control Configuration page, click Project at the top right to open the
corresponding window.
Figure 5-30 Import project files
Step 2 Click Select to select the desired project file and click Open.
Step 3 Click Import to import the selected file to the device.
After the project file is imported successfully, the device will automatically restart.

5.8.2 Export Project Files

When the device configuration is complete, you can export the configuration information
as a project file and save it to your computer for quick configuration in the future.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
51