Configure Ir Learning - NovaStar Vunit 3000 User Manual

Step 5 Click OK to complete the level adding.
Note:
Once the product type and manufacturer are added, you can simply select the added one from the drop-
down list for future use.

5.7.2 Configure IR Learning

Prerequisites
You have added the level.

You have obtained the remote control.

Operating Procedure
Step 1 On the IR page, click IR Learning at the top right to open the IR learning window.
Figure 5-28 IR learning
Step 2 Select the product type, manufacturer and product model.
Step 3 Click to add the desired command.
Step 4 Enter a name for the added command.
Enter the command descriptions to better obtain the command information.
Step 5 Click Start IR Learning and the device will enter the learning mode.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
49