Smartlct; Firmware Update; Novalct - NovaStar MCTRL660 PRO User Manual

MCTRL660 PRO Independent Controller
User Manual

8.3.2 SmartLCT

Connect the MCTRL660 PRO to the control computer installed with SmartLCT V3.2.0
or later via USB port to perform building-block cabinet configuration, seam brightness
adjustment, real-time monitoring, hot backup, etc. For details on their operations, see
SmartLCT User Manual.
Figure 8-2 User interface of SmartLCT

Firmware Update

8.4.1 NovaLCT

In NovaLCT, perform the following steps to update the MCTRL660 PRO firmware.
Step 1 Start NovaLCT and choose User > Advanced Synchronous System User Login
and log in as an advanced user.
Step 2 Type the secret code "admin" to enter the program loading page.
Step 3 Click Browse to select the update program path and then click Update.
8.4.2 SmartLCT
In SmartLCT, perform the following steps to update the MCTRL660 PRO firmware.
Step 1 Start SmartLCT and enter the V-Sender page.
Step 2 In the properties area on the right, click
Step 3 Click
Step 4 Click Update.
www.novastar.tech
to select the update program path.
8 Operations on PC
to enter the Firmware Upgrade page.
34