Configure Central Control Devices; Read Back Device Information; Configure Connector Parameters - NovaStar Vunit 3000 User Manual

5

Configure Central Control Devices

Click the Central Control Configuration tab to enter the corresponding page.
Figure 5-1 Central control configuration

Read Back Device Information

After the device is connected in BCTools, the device related information will be
automatically read back. When multiple users are editing the device, the device information
can be manually read back.
Step 1 On the Central Control Configuration page, select the desired device form the device list
on the left.
Step 2 Click Read Back and the system will automatically re-read the device information and
display the latest information.

Configure Connector Parameters

Step 1 Click the Central Control Configuration tab to enter the corresponding page.
The connector parameters are displayed by default.
Step 2 Select the desired device form the device list on the left.
Step 3 Click Apply to complete and apply the configurations.
www.novastar.tech
Vunit 3000 Professional Control Processor User Manual
22