Batch Update - NovaStar Vunit 3000 User Manual

Professional control processor

Operating Procedure

Step 1 On the Device Configuration page, select the desired device from the device list.

Step 2 Click

in the column of Action to open the firmware update window.

Figure 4-3 Firmware update

Step 3 Click Select and then select the obtained update package.

Step 4 Check the box in front of the desired card or device.

If you want to update the main control card or other corresponding cards, only check the

box in front of the desired card slot number.

Step 5 Click Update and the system will automatically update the selected device or card.

4.2.2 Batch Update

Prerequisites

You have obtained the update package.

Operating Procedure

Step 1 On the Device Configuration page, check the boxes in front of the desired devices.

Step 2 Click Batch Update to open the firmware update window.

www.novastar.tech

Vunit 3000 Professional Control Processor User Manual

Table of Contents

Do you have a question about the Vunit 3000 and is the answer not in the manual?