Table of Contents
Advertisement
7.
Remove the WWAN module (4) by pulling the module away from the slot at an angle.
8.
If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve
must be installed on the antenna connector, as shown in the following illustration.
To replace the WWAN module, reverse the removal procedures.
NOTE:
The WWAN module is designed with a notch to prevent incorrect insertion.
Memory modules
To replace memory modules, use this procedure and illustration.
Table 5-5
Memory module descriptions and part numbers
Description
32 GB, NECC
32 GB, ECC
32 GB, for use in the People's Republic of China
16 GB, NECC
16 GB, ECC
Spare part number
N50075-001
N50074-001
N77400-001
N38627-001
N50073-001
Memory modules
47
Advertisement
Table of Contents
Troubleshooting
