Memory Module - HP Chromebox G4 Maintenance And Service Manual

2. Remove the solid-state drive (2) by sliding it away from the slot at an angle.
To install the solid-state drive, reverse this procedure.

Memory module

To remove the memory module, use this procedure and illustration.
Table 5-7 Memory module description and part numbers
Description
16 GB (DDR4, 3200 GHz, 1.2 V)
8 GB (DDR4, 3200 GHz, 1.2 V)
4 GB (DDR4, 3200 GHz, 1.2 V)
Before removing the memory module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the I/O side frame
4. Remove the bottom shield
Remove the memory module:
1. Insert a case utility tool or similar thin, plastic tool into the openings (1) on either side of the memory
module shield and remove the shield (2). The memory module shield is available using spare part
number L17264-001.
NOTE:
into the retention clips (3) built into the system board.
(Bottom cover on page
(I/O side frame on page
(Bottom shield on page
When installing the memory module shield, be sure that the edges of the shield fit securely
(Preparation for disassembly on page
22).
23).
24).
Spare part number
L67710-005
L46598-005
L83673-005
22).
Memory module 29