Chapter 7
Configuring Call Home
Table 7-3
Call Home Alert Groups, Events, and Actions (continued)
Call Home
Alert Group
Trigger Event
—
PEM /FM
HARDWARE_
REMOVAL
—
PEM /FM
HARDWARE_I
NSERTION
Syslog
—
—
SYSLOG
—
SYSLOG
—
SYSLOG
—
SYSLOG
—
SYSLOG
—
SYSLOG
—
SYSLOG
—
SYSLOG
Test
—
Message Contents
The following tables display the content formats of alert group messages:
•
•
•
•
This section also includes the following subsections that provide sample messages:
•
•
OL-16506-10
Syslog Event
%ASR1000_PEM-6-REMPEM_FM
%ASR1000_PEM-6-INSPEM_FM
—
LOG_EMERG
LOG_ALERT
LOG_CRIT
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG
TEST
Table 7-4
describes the content fields of a short text message.
Table 7-5
describes the content fields that are common to all long text and XML messages. The
fields specific to a particular alert group message are inserted at a point between the common fields.
The insertion point is identified in the table.
Table 7-6
describes the inserted content fields for reactive messages (system failures that require a
TAC case) and proactive messages (issues that might result in degraded system performance).
Table 7-7
describes the inserted content fields for an inventory message.
Sample Syslog Alert Notification in Long Text Format, page 7-43
Sample Syslog Alert Notification in XML Format, page 7-47
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Description and CLI Commands
Severity
Executed
6
PEM/FM slot (slot number)
removed.
6
PEM/FM slot (slot number)
inserted.
—
Event logged to syslog.
CLI commands executed:
show inventory
show logging
0
System is unusable.
1
Action must be taken immediately.
2
Critical conditions.
3
Error conditions.
4
Warning conditions.
5
Normal but signification condition.
6
Informational.
7
Debug-level messages.
—
User-generated test message. (Sent
to TAC.)
CLI commands executed:
show platform
show inventory
show version
Message Contents
7-39