Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual page 223

Chapter 7 Configuring Call Home
Enter configuration commands, one per line.
Router(config)# call-home
Router(cfg-call-home)# mail-server smtp.example.com priority 1
Router(cfg-call-home)# mail-server 192.168.0.1 priority 2
Router(cfg-call-home)# exit
Router(config)#
Associating the Management Interface VRF With Call Home
The Call Home feature requires the management interface VRF (Mgmt-intf) to provide e-mail messaging
support. If you have not configured the management interface VRF, see the
Management Interface VRF" section on page
To associate the management interface VRF with Call Home, complete the following steps:
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3
vrf Mgmt-intf
Example:
Router(cfg-call-home)# vrf Mgmt-intf
Configuring a Destination Profile for E-mail
To configure a destination profile for e-mail transport, complete the following steps:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
OL-16506-10
configure terminal
call-home
vrf Mgmt-intf
configure terminal
call-home
profile name
destination transport-method email
destination address email email-address
destination preferred-msg-format {long-text | short-text | xml}
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
End with CNTL/Z.
7-4.
Purpose
Enters global configuration mode.
Enters call home configuration mode.
(Required) Associates the Mgmt-intf VRF for the email
transport method using Call Home.
How to Configure Call Home
"Configuring the
7-7