Configuring Contact Information - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

Chapter 7 Configuring Call Home

Configuring Contact Information

Each router must include a contact e-mail address. You can optionally include a phone number, street
address, contract ID, customer ID, and site ID.
To assign the contact information, complete the following steps:
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router> configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3
contact-email-addr email-address
Example:
Router(cfg-call-home)# contact-email-addr
username@example.com
Step 4
phone-number +phone-number
Example:
Router(cfg-call-home)# phone-number
+1-222-333-4444
Step 5
street-address street-address
Example:
Router(cfg-call-home)# street-address "1234 Any
Street, Any city, Any state, 12345"
OL-16506-10
configure terminal
call-home
contact-email-addr email-address
phone-number +phone-number
street-address street-address
customer-id text
site-id text
contract-id text
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Purpose
Enters global configuration mode.
Enters call home configuration mode.
Assigns the customer's e-mail address. Enter up to 200
characters in e-mail address format with no spaces.
(Optional) Assigns the customer's phone number.
Note The number must begin with a plus (+) prefix, and
may contain only dashes (-) and numbers. Enter up
to 16 characters. If you include spaces, you must
enclose your entry within double quotation marks ("
").
(Optional) Assigns the customer's street address where
RMA equipment can be shipped. Enter up to 200 characters.
If you include spaces, you must enclose your entry within
double quotation marks (" ").
How to Configure Call Home
7-19