Example; Configuring The Number Of Call Home Messages Sent Per Minute - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

How to Configure Call Home
Command or Action
Step 6
customer-id text

Example:

Router(cfg-call-home)# customer-id Customer1234
Step 7
site-id text
Example:
Router(cfg-call-home)# site-id Site1ManhattanNY
Step 8
contract-id text
Example:
Router(cfg-call-home)# contract-id Company1234
Example
The following example shows the configuration of contact information:
Router# configure terminal
Enter configuration commands, one per line.
Router(config)# call-home
Router(cfg-call-home)# contact-email-addr username@example.com
Router(cfg-call-home)# phone-number +1-222-333-4444
Router(cfg-call-home)# street-address "1234 Any Street, Any city, Any state, 12345"
Router(cfg-call-home)# customer-id Customer1234
Router(cfg-call-home)# site-id Site1ManhattanNY
Router(cfg-call-home)# contract-id Company1234
Router(cfg-call-home)# exit

Configuring the Number of Call Home Messages Sent Per Minute

The Call Home feature defaults to a maximum of 20 messages per minute. If you want to change that
value, complete the following steps:
SUMMARY STEPS
1.
2.
3.
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
7-20
configure terminal
call-home
rate-limit number
Purpose
(Optional) Identifies the customer ID. Enter up to 64
characters. If you include spaces, you must enclose your
entry within double quotation marks (" ").
(Optional) Identifies the customer site ID. Enter up to 200
characters. If you include spaces, you must enclose your
entry within double quotation marks (" ").
(Optional) Identifies the customer's contract ID for the
router. Enter up to 64 characters. If you include spaces, you
must enclose your entry within double quotation marks ("
").
End with CNTL/Z.
Chapter 7 Configuring Call Home
OL-16506-10